Huawei Switch timeout
某天有一個site的network出現問題, 需要reboot switch網絡才能正常運作, 但是reboot過後還是看到一些奇怪log在其中一個AP Port口, 相信問題未能真正解決, 最後還發現Mesh AP未能達到正常速度, 所以也都把Mesh的所有AP重啟一下, 從log上看到曾經出現C...
Posted inHauwei
Huawei Switch Stack Lab 2
Add stack: SW1 int stack-p 0/1 port int g0/0/8 enable int stack-p 0/2 port int g0/0/7 enable quit stack slot 0 priority 200 SW2 int stack-p 0/1 port i...
Posted inHauwei
Huawei Switch Stack Lab 1
Add stack: SW1 int stack-p 0/1 port int g0/0/12 enable stack slot 0 priority 200 SW2 int stack-p 0/2 port int g0/0/11 enable quit stack slot 0 renumbe...
Posted inHauwei
huawei switch restart poe iot
[SW1]display poe power-state [SW1]int g0/0/1 [SW1-GigabitEthernet0/0/1]undo poe enable [SW1-GigabitEthernet0/0/1]poe enable
Posted inHauwei
Huawei Cloud Campus
sys [Huawei]ap-mode-switch cloud [Huawei]cloud-mng controller url naas-hk-intl.huaweicloud.com port 10020
Huawei STP
POE for CCTV LSW7 G0/0/2 - LSW6 G0/0/2及LSW1 G0/0/1 - LSW2 G0/0/1為後備 LSW5 stp root primary LSW8 stp root secondary LSW1 int g0/0/1 stp cost 100 LSW6 in...
HCNA STP Lab3-1
S1 sys sysname S1 stp mode stp stp root pri S2 sys sysname S2 stp mode stp stp root sec S1 undo stp root stp pri 8192 S2 undo stp root stp pri 4096 S2...
HCNA Static Route Lab4-1
R1 sys sysname R1 int g0/0/0 ip add 10.0.13.1 24 int g0/0/1 ip add 10.0.12.1 24 int lo0 ip add 10.0.1.1 24 R2 sys sysname R2 int g0/0/1 ip add 10.0.12...
HCNA vLan Routing Lab1-4
R1 sys sysname R1 int g0/0/1 ip add 10.0.4.1 24 R3 sys sysname R3 int g0/0/1 ip add 10.0.8.1 24 S1 sys sysname S1 vlan batch 4 8 int g0/0/1 port link-...
Hauwei Hybrid 測試
R1 sys sysname R1 int g0/0/0 ip add 10.100.30.1 23 R2 sys sysname R2 int g0/0/0 ip add 10.100.31.1 23 SW1 sys sysname SW1 vlan 2 vlan 3 port-group vla...